SCSI_IOCTL_SEND_COMMAND 0x1. This ioctl() also offers a "pass through" SCSI command capability which is a subset of what is offered by the sg driver.
The structure that we are passed should look like:
struct sdata {
unsigned int inlen; [i] Length of data written to device
unsigned int outlen; [i] Length of data read from device
unsigned char cmd[x]; [i] SCSI command (6 <= x <= 16)
[o] Data read from device starts here
[o] On error, sense buffer starts here
unsigned char wdata[y]; [i] Data written to device starts here
};
|
The SCSI command length is determined by examining the 1st byte of the given command [1] . There is no way to override this.
Data transfers are limited to PAGE_SIZE (4K on i386, 8K on alpha).
The length (x + y) must be at least OMAX_SB_LEN bytes long to accommodate the sense buffer when an error occurs. The sense buffer is truncated to OMAX_SB_LEN (16) bytes so that old code will not be surprised.
If a Unix error occurs (e.g. ENOMEM) then the user will receive a negative return and the Unix error code in 'errno'. If the SCSI command succeeds then 0 is returned. Positive numbers returned are the compacted SCSI error codes (4 bytes in one int) where the lowest byte is the SCSI status. See the drivers/scsi/scsi.h file for more information on this.
| [1] |
Here is the mapping from the SCSI opcode "group" (top 3 bits of opcode) to the assumed length (in lk 2.4.15):
|