Other related documentation from the Linux Documentation Project:
Net HOWTO, previously named the NET3-4-HOWTO, the definitive, in-depth guide to various Linux networking topics.
Linux 2.4 Advanced Routing HOWTO. All the new, improved features are explained here.
More on the 2.4 kernel packet filtering from The Netfilter Project at http://netfilter.samba.org/. Several good HOWTOs for the new features in 2.4.
Check your security and see what ports are open at http://hackerwhacker.com/. This is one of the better sites for this. Some only test a relatively few ports.
SuSE's Linux PPPoE page is at http://www.suse.de/~bk/PPPoE-project.html. Good information on most of the available Linux PPPoE implementations.
Bob Carrick's definitive PPPoE site is at http://www.carricksolutions.com/. His Linux PPPoE page is at http://www.carricksolutions.com/linuxpppoe.htm. It has some other DSL related information as well. All OSes are covered.
The NTS EnterNet for Linux FAQ can be found at http://http://support.efficient.com/KB/NTS/linux.html. This is a non-GPL'd PPPoE client that is distributed by some ISPs.
ATM on Linux: http://lrcwww.epfl.ch/linux-atm/. Where to find the latest info on PPPoA and raw ATM connections.
A step by step report on getting Linux going with raw ATM is here: http://linux.com.sg/news/atm/.
FreeSwan, http://www.freeswan.org, is an IPSec and IKE VPN implementation for Linux.
VPN and Masquerading on Linux: http://www.wolfenet.com/~jhardin/ip_masq_vpn.html
PPTP-linux allows you to connect to a PPTP server with Linux. The home page is http://cag.lcs.mit.edu/~cananian/Projects/PPTP/.
Justin Beech's http://dslreports.com, a great site for anything and everything related to DSL. If it's not there, then there is a link to it. (Site runs on Linux.)
John Navas's Cable and DSL site, http://cable-dsl.home.att.net, has good general info, tweaks, troubleshooting, hardware info, etc. for all OSes.
TCP Performance Tuning tips: http://www.psc.edu/networking/perf_tune.html. Tips on Linux, and other OSes.
A great Linux security site is http://linux-firewall-tools.com/linux/. Lots of info from Robert L. Ziegler, author of Linux Firewalls. Many links to other security related sites as well.
http://www.securityportal.com/lasg/, The Linux Administrator's Security Guide by Kurt Seifried. Good tutorials on a variety of topics -- not just firewalls, but the big picture.
The Seattle firewall is an ipchains based firewall that can be used on a dedicated masquerading firewall machine (including LRP), a multi-function masquerade gateway/server or on a stand-alone Linux system. The project is located at http://seawall.sourceforge.net/
My ipchains script is at http://personal.bellsouth.net/~hburgiss/linux/ipchains.html. This has IP Masquerading already set up, is reasonably well commented, and may make a quick starting point for your own script with only minor adjustments to suit your situation.
Here a few pages dedicated to using Linux with specific providers. (I could use some submissions for more please.)
Verizon: http://www.panix.com/~dfoster/prog/linux/pppoe.html
Southwestern Bell: http://home.swbell.net/sdboyd56/DSL/connect1.html
BellSouth: http://personal.bellsouth.net/~hburgiss/dsl/survival/linux.htm
HomeChoice (UK): http://www.maxuk.net/hc/faq.html. (This gets my vote for the strangest ADSL service anywhere.)
France Télécom's Netissimo: http://www.rhapsodyk.net/adsl/HOWTO/. Good information on setting up PPTP with Linux for Alcatel modems.
Austrian Highspeed Internetconnection & Linux HOWTO: http://www.members.aon.at/heimo.schoen/at-highspeed-howto.html.
Now that you have a full-time connection, want a routable hostname for your computer? Dynamic DNS services can do this, even if your IP changes from time to time. Just a few of the many available services:
http://dyndns.org
http://tzo.com
http://easydns.com
http://no-ip.com
http://www.microtech.co.gg/dns
ADSL Deployment 'round the World Claims to have a complete list - looked accurate for my area - gives providers, prices, speeds, etc.
comp.dcom.xdsl FAQ. Actively maintained, and a great technical reference for DSL technologies.
comp.dcom.xdsl, DSL discussions, vents, and flames on Usenet. Good place to get technical questions answered that your ISP can't.
A dictionary of some of the jargon used in this Document, and in the telco and DSL industries.
Asymmetric Digital Subscriber Loop. "Asymmetric" in that the downstream potential is greater than the upstream. ADSL is capable of sharing on a single POTS wire pair. Maximum speed is 8 Mbps, though typically is limited by the provider to lesser speeds. The most popular DSL at this time.
ADSL Network Termination (a.k.a. the ADSL modem).
Address Resolution Protocol. Converts MAC addresses to IP addresses.
Alcatel's terminology for a DSLAM.
Asynchronous Transfer Mode - provides high-speed packet switching from 155 Mbps to (currently) 2Gbps. Used to provide backbone switching for the Internet, and by many telcos since it can carry both voice and data. This is a common transport protocol for many telco DSL networks.
ATM Forum Interface - 25Mbps speed, provided by a PCI NIC card. One of the interfaces used between the modem and PC.
A combination DSL modem that can be configured to act as either a bridge or a router.
Carrierless Amplitude Phase. A proprietary ADSL line encoding technique, that is (or was) in competition with "DMT". DMT has won the standards battle. CAP and DMT modems are not compatible with each other.
Usually refers to one of two meanings: 1) The local Telco building that houses telephone equipment, and where local loops terminate. 2) The Telco voice switch that provides dial tone. Often referred to as just "CO". Typically, the CO houses one or more DSLAMs that make DSL possible. But, increasingly, DSLAMs are being deployed remotely.
Competitive Local Exchange Carrier. "Competitors" to the ILECs. They do not own any lines, and must lease their lines from ILEC in order to provide any service.
Customer Premises Equipment - The Telco term for customer owned equipment (i.e. the stuff you are responsible for fixing). Examples are CSU/DSU, modems, fax machines, and your phone.
Dynamic Host Configuration Protocol - A protocol used to distribute dynamically assigned IP addresses and other important networking parameters. The DHCP server "leases" an IP from its pool to clients on request. The lease is renewed at regular intervals. This is a common protocol on bridged DSL networks, and cable modem networks.
Discrete Multitone Technology. This is a line encoding common among ADSL deployments, and now is the standard. Sometimes referred to as "Alcatel compatible". Most telcos in the U.S. are now standardizing on DMT. The other, less common, ADSL encoding is "CAP". CAP and DMT modems are incompatible with each other.
The basic digital circuit for Telcos - offered at 56 Kbps or 64 Kbps. Can support one analog voice channel.
Digital Subscriber Loop Access Multiplexer - The Telco equipment installed at the CO that concentrates and multiplexes the DSL lines. One end of the copper loop connects to the DSLAM, the other to your modem. The DSLAM is essentially what makes DSL work. Increasingly, smaller devices that perform similar functions, are being deployed in remote locations in order to extend the reach of DSL.
Digital Subscriber Loop - A term describing a family of DSL services, including ADSL, SDSL, IDSL, RADSL, HDSL, VDSL, SHDSL, etc. that enable high speed Internet connections.
Synonymous with "full rate" ADSL. Used to distinguish between full rate ADSL, CAP based ADSL and G.Lite. See DSL Family for more.
A lesser version of ADSL that has lower maximum speeds, and requires no splitter or filters. Not DMT compatible. See DSL Family in this HOWTO for more.
High bit rate DSL. See DSL Family in this HOWTO for more.
Incumbent Local Exchange Carrier. The Regional phone company that physically owns the lines. Examples: Bell Atlantic and Pacific Bell. FCC regulations are forcing the ILECs to open up their networks to independent providers. This is allowing the independents like Covad and Rhythms to offer competitive services. This is a good thing for consumers IMHO.
Incumbent Local Exchange Carrier. The Regional phone company that physically owns the lines. Examples: Bell Atlantic and Pacific Bell. FCC regulations are forcing the ILECs to open up their networks to independent providers. This is allowing the independents like Covad and Rhythms to offer competitive services. This is a good thing for consumers IMHO.
Interleaving is a tunable aspect of DMT/ADSL line encoding. It essential controls the 'interleaving' of bits in the transmission, and is used as a form of error correction. As interleaving increases, so does stability of marginal lines. It also increases latency.
Internet Protocol. Often used to simply refer to an IP address.
Internet Service Provider. Even full-time connections require an ISP to provide basic Internet services and connectivity.
Local Area Network. A network of computers that are segregated from the WAN (Wide Area Network, i.e. the Internet). Often using private, non-routable IP addressing, e.g. 192.168.1.1 or 10.0.0.1.
The two wire twisted pair from the telco Central Office that terminates at a customer location. For DSL, a "clean" copper loop within the distance limitations is required.
Media Access Control Address. Sometimes also called "hardware" address, it is a unique identifier of network devices and is an important aspect of some network environments.
Remote Access Multiplexer, a mini DSLAM. Typically with very few connections -- eight is common. Used for remote areas too far from a CO.
Maximum Transmission Unit, the largest packet size, measured in bytes, that a network can transmit. Any packets larger than the MTU are divided into smaller packets before being transmitted.
Network Address Translation is a means of allowing computers on a LAN to access the WAN while "masquerading" with the IP address of a host with a suitable address and configuration. With Linux this is called "ip-masquerading". Often used to share one public, routable IP address among hosts located on a LAN behind a masquerading proxy where the local addresses are private and non-routable.
Network Interface Device - The telco housing on the side of your house. Typically where the telco's responsibility ends, and the owner's begins. Also, sometimes called the "SNI", "TNI" or "ONI" or other descriptive acronyms.
Network Interface Card - An internal PC card that supports the required network interface. Often an ethernet 10/100baseT or an ATMF-25Mbps card in this context.
Network Service Provider. An ISP's upstream provider or backbone provider.
A fiber optic line capable of 155 Mbps.
Plain Old Telephone Service - The service that provides a single analog voice line (i.e. a traditional phone line).
PPPoATM, or Point-to-Point Protocol over ATM (RFC 2364). One of the PPP protocols being used by some DSL ISPs. This is really a device specific driver. A hardware device, i.e. a combination modem/router, is one alternative if this is the only option available to you.
Point-to-Point Protocol over Ethernet (RFC 2516). Another PPP protocol in use by providers. This one is more common, and there are several Linux clients available. See the Links section for more.
Used to refer to PPPoE and PPPoA collectively.
Rate Adaptive DSL. See DSL Family in this HOWTO for more.
Regional Bell Operating Company. The "Baby Bells". The U.S. phone companies that have had a state sponsored monopoly since the break up of AT&T.
Radio Frequency Interference. DSL is susceptible to RFI if in the right frequency range, and if close enough to the DSL signal. This can disrupt and consequently degrade the DSL signal. Unfortunately, DSL seems to operate in the frequency range of quite a few potential disrupting influences.
Shorthand for 'Receive Window', aka the TCP Receive Window, a tunable aspect of TCP network stacks.
Single Line DSL. Or, sometimes also "Symmetric DSL". See DSL Family for more.
Subscriber Network Interface - The Telco term for the phone wiring housing on the side of your house. It designates the point between the Telco side and the Inside Wire. This is also called the Demarcation Point. Sometimes called a "NID" also.
The passive device (low-pass filter) at or near the NID that splits the DSL signal into separate voice and data channels. Filtering is required for most DSLs that share a POTS line.
A DSL installation that does not require a splitter. For higher speeds, a RJ11 filter (sometimes called microfilters) is placed on every extension phone jack where an analog phone or other non-DSL device is used, thus filtering the DSL signal at the jack, rather than at the NID. For lower speeds, no filter is necessary. Without a filter or splitter, the DSL signal tends to cause audible interference on voice phones. G.Lite needs no splitter, nor filter, but this is the exception to the rule.
Small Office HOme
The speed as negotiated by the DSL modem and the telco's DSLAM. This represents the theoretical maximum speed of the connection before any networking protocol overhead is taken into account. Real world throughput is always something less than the modem's sync rate.
German Telekom's ADSL implementation. See DSL Family for more.
a.k.a DS1 - A digital dedicated line at 1.544 Mbps comprised of 24 channels, used for both voice (24 DS0s) and data.
a.k.a DS3 - T1's big brother, a digital dedicated line at 44.736 Mbps, used for both voice (672 DS0s or 28 DS1s) and data.
VPI is "Virtual PATH Identifier" and is part of an ATM cell header. VCI is "Virtual Circuit Identifier", also part of an ATM cell header which contains circuit information. Technically speaking, these are really remote VPI and VCI (RVPI, RVCI). They are both important configuration aspects for modems and routers attached to ATM networks (the most common approach). They must match what the provider is using. Frequently used VPI/VCI pairs are 0/32, 0/35 and 8/35.
Very high bit rate DSL. See DSL Family for more.
Video on Demand.
Voice over DSL.
Wide Area Network, a large publicly accessible network. For example, the Internet.
Used to refer to the entire DSL family of related technologies: ADSL, SDSL, IDSL, etc.
The Telcos see DSL as a competitor to the Cable Company's Cable Modem, and as such, are providing competitive pricing and configuration offerings. Although Cable Modems are advertised as having 10-30Mbps potential bandwidth, they use a shared transmission medium with many other users on the same line, and therefore performance varies, perhaps greatly, with the amount of traffic, time of day, and number of other users on the same node.
It is often heard that DSL has an advantage in that it is a private pipe to the Internet, with dedicated bandwidth. This is mostly a myth. You do have a private pipe to the DSLAM, but at that point, you enter the telco's ATM (or frame relay) network, and start sharing bandwidth. You are at the mercy of how well your DSL provider and ISP manage their networks. The consensus seems to be that DSL providers and ISPs are mostly doing a better job of managing bandwidth than the Cable companies. It is easier for them to add and adjust bandwidth as needed to meet demand. You are less likely to have speed fluctuations due to other users being on line at the same time. But, again, this gets down to how well the network and bandwidth are managed.
DSL probably has a small security advantage too. With most Cable modem networks, it is like being on a big LAN. You are sharing your connection (and bandwidth) right at the point of connection. But if you are not doing something to filter incoming connections already, you are asking for trouble either way.
There also seems to be a better chance of having ISP alternatives with DSL than Cable. At least, in the U.S. this is true. Choice is a good thing, and so is competition. It seems most Cable outfits give you just one choice for an ISP. If you don't like it, you are out of luck. The number of options with DSL probably varies greatly by geographic areas. Populous areas, like Northeast U.S., seem to have many options.
So which is better? The differences aren't as much with the technology, as they are with the implementations. If you look around, you can find plenty of horror stories on either. And plenty of happy customers too. The way to know what may be the best for you, is to do comparative shopping based on experiences of other users in your area. Don't base your choice on one person's opinion. This is statistically invalid. Likewise, don't base your choice on someone's opinion who has had a particular service for only a short time. Again, statistically not worth much. Get as many opinions from those that are using the exact same services that you are looking at.
In some areas, newer neighborhoods are being built with fiber optic cable instead of the traditional telco copper lines. While the fiber is a definite problem for DSL services, it has it's own potential advantages. Existing fiber is potentially capable of 100 Mbps, and it looks like this could easily go up soon.
So while telco fiber customers are being shut out of the DSL market (since DSL is a copper only technology), they may have much to look forward to. Technologies are under development, and in some cases just now being deployed, to take advantage of fiber telco phone loops. Known as "FTTC" (Fiber To The Curb), or "IFITL" (Integrated Fiber In The Loop), this technology is another high speed service that telcos can offer. The speeds are sufficient for VoD (Video on Demand) and VoDSL (Voice over DSL), and other high bandwidth services. One nice advantage here is, that since there is no DSL signal on the wire, the only required CPE is a network card. In other words, no modem -- just connect a NIC to the wall jack and off you go! This will also allow the telco to provide other digital services such digital TV.
FTTC is Fiber To The Curb. The last leg into the house is still copper. FTTH (Fiber To The Home), on the other hand, is an all fiber loop with even higher potential.
There is a lot of buzz about wireless technologies these days. Wireless would certainly seem to have a place in the broadband market, especially for areas that don't have ready access to cable or telco networks. There are still some inherent problems with the current state of this technology that may prevent it from becoming a major player in the near term however. Weather can still impact the wireless signal -- heavy cloud cover or rain for instance. Also, there is some pretty hefty latency if the uplink is via satellite. Surely these drawbacks will improve over time. But how soon?
This list is limited to those modems and delivery systems that are readily available, and should work with any current Linux distribution without having to go to extraordinary lengths. Alpha and Beta projects are not included.
All external, ethernet based modems, and modem combination devices, will work (provided they match the provider's DSL). The only requirement is a compatible ethernet network card. This is the preferred way to go.
Xpeed X200 IDSL http://www.xpeed.com/Products/x200/x200_c.html (as of kernel 2.2.18)
Xpeed X300 SDSL http://www.xpeed.com/Products/x300/x300_c.html (as of kernel 2.2.18)
Alcatel SpeedTouch USB (ADSL): http://www.alcatel.com/consumer/dsl/supuser.htm#driver. The driver is kernel module and requires a 2.4 kernel.
By "friendly" we mean ISPs that don't put up any unnecessary impediments just because you aren't running that other guy's OS. And yes, there is some of that going around. If your choices are limited, and you are forced to deal with one of these, then having a Windows box available temporarily is one work around. Another, may be to sweet talk the installer into letting you finish the installation (NIC, etc). Of course, self installation, if available, should be completely "Linux compatible".
So to make this list, the ISP/provider must make available some type of workable modem (ethernet interface at this point in time), nor should they penalize you, or make things difficult, just because you are running an alternate OS. Installing directly onto Linux should be an available option, and should not cause you any undue hardship. Technical support for Linux is a nice bonus, but not necessary to make the list. Please do not take these as recommendations, do your own homework. Also, this market is in a constant state of flux, so use this as a starting point only!
To add a name to this list, mail . Please included ISP's official name, URL (if not obvious), location and coverage area, modem type, server policy, and any other pertinent details.
Speakeasy.net: Static IP and no PPPoX, servers explicitly allowed. Highly rated. National. Multiple IPs available.
DirectTV DSL (formerly Telocity): Static IP, no PPPoX, liberal server policy. Reports of abysmal tech support. National. They have their own proprietary modem, but it is ethernet based.
Penguinista DSL, DSL with a twist. Not just Linux friendly, but Linux lovers. Sponsored by the Benevolent Penguin Society. National. Static IP available. "Theoretical" timeouts and session limits though. Encapsulation protocol (PPP?) unknown. ???
qx.net, Lexington, Ky., and areas of Central and Eastern KY. Officially supports Linux. Static IP. Personal servers allowed. Tiered pricing plans. Highly rated.
Commonwealth Technical Services, Richmond, Va. Officially, and happily support Linux. Static IP. Personal servers allowed. No bandwidth restrictions. This ISP runs on Linux!
ExecDSL, Baltimore, MD, Washington, DC and surrounding areas. Static IP. Servers are OK. Various plans and DSL providers. Secondary MX and DNS available (nice touch!). (Apparently no official Linux support.)
Netexpress.net, Moline, Ill. Tiered pricing. Static IP available. Apparently, no official support. Runs on Linux!
iglou.com, Lexington, Ky., and soon in Louisville, Ky, Cincinnati, OH, and maybe Nashville, TN. Static IP available. Personal servers allowed. Tiered pricing plans with various options.
Bluegrass.net, Lexington, Ky., and surrounding areas. Static IP. Personal servers allowed. Tiered pricing plans. Business class DSL only is available in Louisville, Ky.
Netsync.net, Chautauqua County, NY (Fredonia, Jamestown, and surrounding areas). Static IP available, PPPoA, servers are OK. Linux is supported!
Aracnet, greater Seattle, WA., and Portland and Salem, OR. areas. Static IP. Linux friendly! Tiered pricing. Shell access account is included (RH)!
Drizzle.com, greater Seattle, WA area. Static IP, servers OK.
Blarg! Online Services, Inc., greater Seattle, WA. area. Static or dynamic IP, PPPoA or Bridged connection. Personal servers allowed (no DNS or mail). Runs on Linux, and supports Linux!
ReedMedia.net, Portland (Oregon) and surrounding areas; and surrounding areas of the following: Vancouver, Olympia, Tacoma, Seattle, Everett, Mt. Vernon, Bellingham (Washington). Various modem options, static IP available, personal servers are allowed.
MM Internet, Southern California. Static IP, personal servers allowed, and secondary MX and DNS (nice!).
Arrival.com, Central California. SDSL, servers allowed.
DSLExtreme.com, greater Los Angeles area. Static IP, personal servers allowed.
Bell Canada's Sympatico High Speed Edition. PPPoE.
Easynet Belgium. Linux is officially supported (Roaring Penguin). Dynamic IP.
BaByXL Broadband DSL, the Netherlands. Linux is supported on Bridged/DHCP connections.
iPrimus Pty Ltd, Sydney and Melbourne, Australia metro areas. Static IP, and multiple IPs available.
Depending on your local setup, you should consider some other issues. These include a firewall setup, and any associated configurations. For my setup, shown in Figure 5 below, I use an old i486 machine configured as a firewall/router between the DSL connection and the rest of my home network. I use private IP addresses on my private LAN subnet, and have configured my router to provide IP Masquerading and Firewalling between the LAN and WAN connections.
See the IP Masquerade HOWTO , and Firewall HOWTO for more information. For 2.4 kernels see the Linux 2.4 Advanced Routing HOWTO. My experience is that Linux is more flexible and provides superior routing/firewalling performance. It is much less expensive than a commercial router -- if you find an old 486 machine that you may be using as a doorstop somewhere.
<--Private Subnet/LAN-> Linux <-----ISP's Public Subnet----><--inet-->
192.168.1.0
X--+ --------
| | | -------- (eth0:0)---------
+--=| Hub/ | | Linux | +------=| DSL |=-DSL-> ISP's
X-----=|Switch|=-----=| System |=----+ | Modem | Gateway
+--=| | eth1 |(Router)| eth0 ---------
| -------- | -------- |
X--+ | IP_Masq |
| IP_Firewall |
| | Gateway |
| | |
| V V
V 192.168.1.1 Dynamic or
192.168.1.x LAN Gateway Static IP
LAN Addresses IP Address from ISP pool
What I did is setup a Linux router (Redhat Linux 5.0 on a i486) with two ethernet interfaces. One interface routes to the ISP subnet/gateway (eth0 in above example), and the other interface (eth1 above) goes to a hub (or switch) and then connects the LAN with private network addresses (e.g. 192.168.1.x). Using the private network address behind your router/firewall allows some additional security because it is not directly addressable from outside. You have to explicitly masquerade your private addresses in order to connect to the Internet from the LAN. The LAN hosts will access the Internet via the second NIC (eth1) in the Linux router. Just set their gateway to the IP address of the second NIC, and assign them addresses on the same network.
Caution Make sure your kernel is complied with IP forwarding and the IP forwarding is turned on. You can check this with 'cat /proc/sys/net/ipv4/ip_forward'. The value is "1" for on, and "0" for off. You can change this value by echoing the desired value into this file:
# echo 1 > /proc/sys/net/ipv4/ip_forward |
You will also need to set up "IP Masquerading" on the Linux router. Depending on your kernel version, this is done with ipfwadm (2.0), ipchains (2.2), or iptables (2.4). See the documentation for specifics on each. AND -- do not forget to have that firewall set up too!
There are also several projects that are devoted specifically to using Linux as a router, just for this type of situation. These are all-in-one solutions, that include security and various other features. Installation and configuration, is reportedly very easy. And these will run on very minimal hardware -- like a floppy drive only. The best known is http://www.linuxrouter.org. You might also want to look at http://www.freesco.org and http://www.coyotelinux.com. There is also http://www.clarkconnect.org/index.html, which is a similar concept but designed to be monitored and configured with a set of Windows based utilities.