Here is what to do, but remember to read the files that come with OpenJade to see if there are any things you want to do special for your platform:
cd /usr/local
tar -xvzf ~/openjade-1.3.tar.gz
cd openjade-1.3
./configure --prefix=/usr/local/openjade-1.3
make
make install
# Once installed, the objects etc. can be deleted.
make clean
|
As mentioned, jadetex and pdfjadetex are TeX macros that are packaged with OpenJade. They can be found in /usr/local/openjade-3.1/dsssl. A handy guide to installing these macros was prepared by Frank Atanassow Christoph and can be found at:
ftp://ftp.dante.de/tex-archive/macros/jadetex/install.pdf
http://www.comptechnews.com/~reaster/installjadetex.pdf
The following, is based on the instructions in install.pdf:
The jadetex and pdfjadetex tex macros require more memory than a regular run of tex. The default tex memory limit configuration is often too limited. The tex configuration file, texmf.cnf, can be edited and variables which limit tex's memory use can be increased. But rather than just editing the texmf.cnf file to allow tex in all instances to have more memory, a custom tex context can be created, called hugelatex. If hugelatex is already configured on your system, you can skip this subsection (which hugelatex).
Verify that a working TeX is installed and find its directory:
bash$ which tex
/usr/share/texmf/bin/tex
bash$ kpsewhich -expand-var='$TEXMFMAIN'
/usr/share/texmf
bash$
|
Using which should find the location of the tex program. If its not found, then you might need to install teTeX then return here. kpsewhich is a utility that comes with teTeX and finds the main tex directory if all goes well.
Now that the texmf directory is known, installation can begin:
cd /usr/share/texmf
cd tex/latex
cp -r config config-temp
cd config-temp
tex -ini -progname=hugelatex latex.ini
mv latex.fmt hugelatex.fmt
mv hugelatex.fmt /usr/share/texmf/web2c
cd ..
rm -r config-temp
cd /usr/share/texmf/bin
ln -s tex hugelatex
cd /usr/share/texmf/web2c
|
% hugelatex settings
extra_mem_top.hugelatex = 8000000
extra_mem_bot.hugelatex = 8000000
hash_extra.hugelatex = 15000
pool_size.hugelatex = 5000000
string_vacancies.hugelatex = 45000
max_strings.hugelatex = 55000
pool_free.hugelatex = 47500
nest_size.hugelatex = 500
param_size.hugelatex = 1500
save_size.hugelatex = 5000
stack_size.hugelatex = 15000
% jadetex
extra_mem_top.jadetex = 8000000
extra_mem_bot.jadetex = 8000000
hash_extra.jadetex = 20000
pool_size.jadetex = 5000000
string_vacancies.jadetex = 45000
max_strings.jadetex = 55000
pool_free.jadetex = 47500
nest_size.jadetex = 500
param_size.jadetex = 1500
save_size.jadetex = 5000
stack_size.jadetex = 15000
% pdfjadetex
extra_mem_top.pdfjadetex = 8000000
extra_mem_bot.pdfjadetex = 8000000
hash_extra.pdfjadetex = 20000
pool_size.pdfjadetex = 5000000
string_vacancies.pdfjadetex = 45000
max_strings.pdfjadetex = 55000
pool_free.pdfjadetex = 47500
nest_size.pdfjadetex = 500
param_size.pdfjadetex = 1500
save_size.pdfjadetex = 5000
stack_size.pdfjadetex = 15000
|
After setting up hugelatex, like above, it may not work until the texhash program is called:
root# texhash
texhash: Updating /usr/share/texmf/ls-R...
texhash: Updating /var/cache/fonts/ls-R...
texhash: Done.
root#
|
Setting up jadetex and pdfjadetex is similar to hugelatex.
cd /usr/local/openjade-1.3/dsssl
make -f Makefile.jadetex install
# make creates and installs the .fmt
# files to /usr/share/texmf/web2c
# Now create symlinks ...
cd /usr/share/texmf/bin
ln -s tex jadetex
ln -s pdftex pdfjadetex
# Finally, run texhash.
root# texhash
|
Jadetex takes a tex file generated from openjade, and outputs a dvi. pdfjadetex takes a tex file generated from openjade, and outputs a pdf. The dvips program takes the dvi and outputs a postscript ps file.
The DocBook DTD is just some sgml text files, so there is nothing to compile. Just unzip them somewhere:
# DocBook DTD V4.1 in
# /usr/local/share/sgml/docbook/4.1
cd /usr/local/share
mkdir sgml; cd sgml
mkdir docbook; cd docbook
mkdir 4.1; cd 4.1
unzip -a ~/docbk41.zip
|
There are some differences between the different versions of the DocBook DTD. The xxissues.txt files document those issues. Tags have been added, removed, and renamed between the versions.
If you need to use DocBook DTD V3.1, it is available from the same place where V4.1 is downloaded. V3.1 is used a lot, so its a good idea to get it and install it in a 3.1/ subdirectory.
For each DocBook DTD version unpacked, go into its directory and unpack the iso8879-entities.tar.gz file:
cd /usr/local/share/sgml/docbook/4.1
tar -xvzf ~/iso8879-entities.tar.gz
|
# If needed ...
cd /usr/local/share/sgml/docbook/4.1
ln -s docbook.cat catalog
|
Installation of the DocBook DSSSL, which works for all versions of DocBook, is just a matter of unzipping it somwhere.
cd /usr/local/share/sgml
mkdir dsssl; cd dsssl
unzip -a ~/db160.zip
# If you downloaded the ldp.dsl stylesheet
# customization, copy it to ...
cd docbook
cp ~/ldp.dsl html
cp ~/ldp.dsl print
# Copy into both directories.
|
If you like it, you can install the sgmltools-lite, but it is optional. Its installation is the standard:
cd /usr/src
tar -xvzf ~/sgmltools-lite-3.0.2.tar.gz
cd sgmltools-lite-3.0.2
./configure
make install
|
One tweak that has to be done to make the sgmltools script work, is you have to edit it and set the path to openjade: vi `which sgmltools`. Consult its docs to learn more about it.
Preferrably you downloaded a binary distribution of htmldoc for your platform. The installation is straightforward: just unpack it and run the setup. Read the docs in the package for more info.
If you downloaded the source, you will also need the Fast Light Tool Kit or else it will not link:
http://www.fltk.org/
Installation is autoconf style. Just run the configure script, make, make install. If all goes well, it will install in /usr/bin.
The htmldoc program has a few glitches when generating output from html files from openjade. For instance, bullet items are not rendered properly and shaded areas are not always shaded.
To fix this problem, a perl script (ldp_print) is available from www.LinuxDoc.org. The script processes a nochunks html file from openjade and then runs htmldoc on it to produce correctly rendered pdf and ps.
Tip: Get it!
tar -xvzf ldp_print.tar.gz
cd ldp_print
# Copy the lib somewhere where perl looks.
cp fix_print_html.lib /usr/lib/perl5/site_perl
cp ldp_print /usr/local/bin
|
Before the spec files from DocBook2X are of any use, the SGMLS.pm module for perl5 has to be installed, assuming that perl5 is installed. The installation of this module is not as automated as most perl module installs. It uses a Makefile that has to be edited first before running make.
cd /usr/src
tar -xvzf ~/SGMLSpm-1.03ii.tar.gz
cd SGMLSpm
# Edit Makfile
vi Makefile
# In the user options of the Makefile
# set everything correct for
# your system.
# Example:
# PERL = /usr/bin/perl
# BINDIR = /usr/local/bin
# PERL5DIR = /usr/lib/perl5/site_perl
# MODULEDIR = ${PERL5DIR}/SGMLS
# SPECDIR = ${PERL5DIR}
# HTMLDIR= /usr/local/apache/htdocs
make install
|
DocBook2X contains no program to compile or install, though it has some scripts you might want to look at, so all there is to do is unpack it somwhere.
cd /usr/local/share/sgml
tar -xvzf ~/docbook2X-0.6.0.tar.gz
cd docbook2X
|
patch docbook2man-spec.pl docbook2man-spec.pl.patch
|
The $SGML_CATALOG_FILES environment variable is used by openjade (and other SGML software) to locate DTDs and DSL (stylesheets). SGML software cannot function without finding these files, which have been unpacked to various directories. Given the setup as done so far, here is how $SGML_CATALOG_FILES can be set in /etc/profile:
##########################################################################################
# SGML DocBook - openjade sgmltools-lite
JADE_HOME=/usr/local/openjade-1.3
SGML_SHARE=/usr/local/share/sgml
PATH=$PATH:$JADE_HOME/bin
# DSSSL stylesheets
# Norm Walsh's Modular DocBook Stylesheets
SGML_CATALOG_FILES=$SGML_SHARE/dsssl/docbook/catalog
# OpenJade stylesheets
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$JADE_HOME/dsssl/catalog
# sgmltools-lite's stylesheets
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/stylesheets/sgmltools/sgmltools.cat
# DocBook DTD
# From OASIS-Open.org
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/docbook/3.1/catalog
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/docbook/4.1/catalog
# These old ones were installed with doctools-1.2 from XFree86.org
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/docbook/2.4.1/catalog
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/docbook/3.0/catalog
# sgmltools-lite catalogs for LinuxDoc
SGML_CATALOG_FILES=$SGML_CATALOG_FILES:$SGML_SHARE/dtd/sgmltools/catalog
export JADE_HOME SGML_SHARE PATH SGML_CATALOG_FILES
##########################################################################################
|
Installation is complete! In the next section, we'll test the installation and convert some test DocBook files.