Ethernet devices names are `eth0', `eth1', `eth2' etc. The first card detected by the kernel is assigned `eth0', and the rest are assigned sequentially in the order in which they are detected.
Once you have your kernel properly built to support your ethernet card, configuration of the card is easy.
Typically you would use something like (which most distributions already do for you, if you configured them to support your ethernet):
root# ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up
root# route add -net 192.168.0.0 netmask 255.255.255.0 eth0
|
Most of the ethernet drivers were developed by Was this section helpful? Why not Donate $2.50?